by Anders Pettersson
Date Added: Sunday 11 June, 2006
The bracket where bent in wrong angle. The washers are hanging loose in between the brackets even after bending the brackets in shape. The brackets must be too short. I am dissapointed because I cant imagine it to be difficult to change this for the manufacturer.
Also the front brackets are making the surface (boot lid surface) to warp more than I feel is sound.
The boot rack will work and I will try to find some more washers to place in the gap between the brackets.
General look is okay. Not difficult to mount if everything had been as intended.
The overall fit is poor and not up to my standard.
Very fast delivery.
Editors Note: The brackets are not fully bent as this helps to pre-load the assembly to the bootlid. There are two sets of washers supplied, at first installation you probably need to use both sets. The rack HAS to be a very tight fit to the boot lid, and if you look closely, it will flex the lid slightly, however, when removed the lid will flex back. This is all exactly as intended by the designers.
Rating: [3 of 5 Stars!]