Date Added: Wednesday 07 March, 2007
a fantastic bit of kit, once i had battled to get the original bushes out, these slipped in with no bother at all, a tight fit, but not too tight if you know what i mean.
I found that the best way to fit these was to get a long piece of threaded bar (about 8"), secure a piece of metal on the end that you want the bush to go towards, thread the bar through the wishbone and the bush through the bar, place a largeish socket next to the bush (about 15mm) and a nut and washer the other side of the socket, tighten the nut and it pulls the bush into place, no bother!!!!
I used a similar setup to get the original bushes out, all you need is a longer threaded bar to go through both bushes (it is advisable to set up your OEM scissor jack in between the wishbones to avert any distortion of the wishbones because a fairly significant amount of force is necessary to shift the original bushes - regardless of how much WD40 and fairy liquid you use)
the benefits are worth the bother though, especially if your car is of the older variety
Rating: [5 of 5 Stars!]