Date Added: Monday 13 January, 2003
Bought these in October and only just got round to fitting them! Instructions only in German but Hey, they're only lights.
Jacked the front up, took wheels off, removed the inner arch covers. Makes it a lot easier.
Removed the 'blanks' from the bumper and the brackets & lamps went straight in.
Ran the wiring straight down the r/h side of inner wing and down by radiator to the lamps. Fitted relay to tapped hole in chassis opposite starter motor, using supplied bolt, took live feed from starter motor. Earth connection to nearest bolt. Ran wire through grommet in bulkhead, below and behind fuse box. This was the trickiest bit for me.
Fitted switch to blank by the side of the headlamp height adjuster switch. Took 'power' from this switch and earthed the lamp switch to the drivers footrest mounting top bolt/nut. This was the easiest 'cause I was cold and it was getting quite dark.
Lights are very good and good quality. Also the car looks a hell of a lot better without the silly black plastic 'blanks' stuck in the bumper.
Just to finish them off, I cut a piece of black two core electrical cable to go round the lamps to fill the small gap in. (Between the lamps and the bumper). They were such a tight fit that I didn't have to glue them in.
Nice bit of kit.
Rating: [5 of 5 Stars!]