Date Added: Friday 10 February, 2012
Excellent service as usual. Dispatched on the day of order, 6 days in total to me in Italy.
I was prepared for a longish mucky job, but the hub was fitted and the car back on the road in about 45 minutes.
An old wood chisel and judicious use of a hammer to remove the outer seal. It's not so difficult. The manual says a 3/4" square drive and socket is required to remove the hub nut, which is very tight at about 150 ft/lbs. But this isn't true. A standard 1/2" square drive is sufficient and a decent length steel bar for leverage. I used a 4' length of steel pipe and the nut came off very easily. Replacement was even easier. Turned out this is probably one of the easiest jobs to do on this car.
Rating: [5 of 5 Stars!]