Date Added: Monday 16 June, 2008
Brilliant accessory, not difficult to fit. I threw away the instructions as I can't read Japanese, but it only took me just under 2 hours to complete, and that was taking my time. The easiest way I found was to jack up the front of the car and remove the front wheels. This gives you easy access to the wheel arch protectors. You only need to remove the bottom part of the protectors, held together by 6 plastic clamps, a couple of clamps underneath and 4 metal screws. This gives you full access. I removed the blanks quite easy by carefully prising the 3 plastic clips which hold it in. I fitted the spotliamps to the bezels first, they just clip in and are held in by 2 screws. Then the whole unit just clips in, line up with the 2 screws and hey presto. The wiring is already there so you just need to plug it in. Refitting the protectors, replacing the front wheels and the jobs done. For the switch stick, just undo the 3 screws underneath, lift off the top and gently remove the bottom one but not completely, just move slightly to one side to give you access to the unit, remove the 2 retaining screws, unplug and slide the unit out. With the new unit it just slides in, rescrew and plug in, refit the housing, all done. You do not have to isolate the battery.
Rating: [5 of 5 Stars!]