Date Added: Saturday 11 March, 2006
Well I just fitted this to my 2002 Arizona & what a pig of a job.
Before purchasing one, if you have a newer car, just check underneath to see if you have the cover over the exhaust & catalyst.
If you do, you will have to remove this, cut out a section of the sound damping & fit the brace.
When you then come to refit the cover, use a couple of clamps to hold it tight so you can put the 10mm bolts back in.
Also, the instructions that come in the pack are different to the ones on here, and talk of 2 thick washers & one thin one.
Not on the brace I had, so fitted a thick one either side.
Going back out to fit the rear one know. Logged on to check the instructions, cos it looked too easy!!!
Can't comment on any change to handling, as I havent got that far yet.
Rating: [4 of 5 Stars!]