Date Added: Monday 31 August, 2009
Fitting this item was a little bit fiddly. Removing the coil pack is necessary to gain access. You'll need a 19mm spanner to undo the old sensor. Finding an angle to get the spanner onto the sensor is a little difficult.
When fitting the new sensor I put a little threadlok onto the thead just to be extra safe. After hand tightening the new sensor, the spanner is only required to nip up the sensor.
The longest amount of time on this job was removing the coil pack and the wiring connectors and refitting it.
Rating: [5 of 5 Stars!]