U Shape Windblocker[WI005/2]
£116.33 inc Vat
by Simon Cushing
Date Added: Sunday 30 September, 2007
Product is certainly good quality and fitting is easy- but it does have problems - if you use the back hole mount on the U Bars mounting plate with the shorter brackets that the blocker comes with you find that the blocker fouls on the window when being lowered or raised . I tried moving the bracket around but you then end up either with a mesh that sits very near to over the top of the U –Bar hoop or quite a bit below. I shall think about this one and see if I can come up with a modification to the bracket or optimum mounting angle…… Tried elongating the mount hole on the angled black fixing bracket by opening it up back towards the angle fixing you can then slide it forward on the bolt and have it horizontal to the rear shelf which gives you a better framing on the U-Bar . Seems to be Ok: you need to unzip your rear window and pull it back a little to give a reasonable clearance to raise and lower the mesh frame but I reckon that should be no real problem just a bit of hassle. You want to avoid drilling the mounting plate for the U-Bar as that is stainless and TOUGH!
Rating: [4 of 5 Stars!]
Average Customer Review: [After 19 Reviews]