Date Added: Thursday 04 May, 2006
Well, after reading all the reviews and being a worried about the poor instructions, I don't see what all the fuss is about!! I'ts pretty obvious how the bar fits. the only thing I changed were four m6 x 25mm hex bolts instead of the two machine screws supplied. The lower two thread into the existing captive nuts on the cars body while the upper two need drilled through with a 1/4 " bit and fitted with "nylock" nuts. You would be better to use largish washers on the outside to cover the 10mm slot. If you tighten these fixings first then the bar will be automatically stretched to ensure that the large seatbelt bolts will fit. Remember... Fit everything gradually, take a bit of time and care and you'll get a brilliant addition to your car.
Rating: [5 of 5 Stars!]