Date Added: Monday 19 October, 2009
Was going to give these a bad review until I worked out the best way to fit them. Had to do both sides. First one took ages with much swearing, second was a piece of cake. Ignore previous post about cutting the outer sleeve. I ended up doing this in frustration on the first one but it is not necessary, they do fit. The important thing is to remove the plastic semi-circular guide at the bottom of the slide mechanism post. It comes out quite easily. Fit all the other parts of the cables - start with the winder drum cos it's the most fiddly - but leave the guide til last. It will slide back in with no problem. Doing this seems to be the only way to gain enough slack in the cables to fit them even with the adjusters fully in. Both windows function perfectly now. Good product and prompt delivery, as always.
Incidentally, make sure you replace the plastic door screen. One side was missing on my car and the door card has some water damage; the other side was fine. The screen is under a tenner, the door card best part of £100.
It's a fiddly job but not difficult. Have fun!
Rating: [5 of 5 Stars!]