by Peter Hall
Date Added: Saturday 21 December, 2013
Fits well on my Eunos Roadster 1.6 1989. I had to put a spacer for the main mounting point. The bracket was roughly 20 mm away from the mounting point on the inner wing. If you were cleverer than me you might think if a better way to do it. 3 large nuts from the tool box and all's well. The top part fits the hole perfectly. I got the stubby beesting aerial too. Reception very reasonable. Much easier than the aftermarket pull up aerial I had before. Steep price wise but you get what you pay for with original parts. Like my car to be as original as possible. I found the aerial wire to be only just long enough after a bit of rerouting on the car side. Still it's not fully home in the socket otherwise it would be stretched. Could do with a tiny extension cable if possible to find such a thing.