by Ian Cumming
Date Added: Thursday 14 June, 2012
Hi, just a couple of comments having read some previous reviews. If you have just bought some lifters recently then the instructions are right; use a 5mm drill for the holes in the hinges then tap out to 6mm. The photos on the Gernam side of the fitting instructions are much clearer than those on the English side. Slightly worried about Roy M's comments about throwing away the locking pins.......why would you need to do this? I kept mine and have no problems. Also he talks about using the second hole instead of the hole that has a bolt in it helping locate the wing; I simply took the bolt out of here and replaced it with the strut bolt. It is a straight swop! The second hole is too big and requires the use of washers to locate the strut bolt. All that said the struts work perfectly and look good, got it all fitted in about an hour, not rushing it! Another Ronseal type product, "It does what it says on the Sales Blurb!"