by Lewis Thomson
Date Added: Monday 26 May, 2014
I didn't use the glue provided. I did a few dry runs before fitting, always hinging it forward from the back (nearest the screen) and pushing down. I then used a strip of insulating tape to act as a hinge on the back of the cover nearest the screen which meant I could line it up perfectly. Once confident with the technique I removed the double sided tape on all but the skinny bit below the lens, but peeled back some of the skinny bit tape for later. Once pressed into place I could then remove the skinny bit tape whilst bending the skinny bit into place. Then removed the insulating tape hinge. It is definitely a one chance affair but as always preparation is the key to success. Good luck!