by Keil Shepherd
Date Added: Friday 21 May, 2004
Okay, they look good on the car but these were a nightmare to fit! The nut that holds them needs a 13mm socket and the little hole on the underside of the hood is to small to allow a 13mm socket through! I had to resort taping the nut to the end of a 10mm socket and tightening it until the tape sheared away. Fortunately that held them and they're nice and tight. Second gripe would be that the 'tails' on them are shorter than the originals so the black rubber connector on the passenger side didn't reach the jet. Had to source a better one from a scrap yard. Didn't cost anything bit it was still an inconvenience. They do look good on the car though.