by Adrian Noble
Date Added: Saturday 04 April, 2009
Great purchase, cheaper than the Mazda Dealer, despite thier 24% reduction were unable to Match the MX5 Parts price.
Straightforward fit, no need to isolate the battery or take off the bumber, just put one wheel up on the Kerb, turn the wheel outwards, if you are right handed work on the left side of the car first. remove the mudguard securing clips by using a phillips head screwdriver to turn the clips anticlockwise and pull them out to reuse later on. you will see the fog lamp cover, remove by easing the three clips outwards and the cover will fall inwards.Assemble to foglamp with the bezel, attach the wiring that is already in place secured with a peice of tape, screw in the assembled lamp and bezel using two screws one on the top and one inward facing. Repeat the other side. The columb stalk is removed by removing the phillips head screws under the steering rack x 3. there is one securing screw- remove. put in the new stalk and screw in place.
The front fog comes on with the side light and is illuminated yellow, then advance the switch further to engage the front and rear fog lamps illuminated red. take your time you dont need to be Einstein to fit these.