by Neil Rossiter
Date Added: Monday 08 February, 2010
Looks great easy to fit, silver bezals match the silver in the headlights. As other reviews state turn the wheels to full lock, I did it with the wheel pointing out on the side I was working on , dident even raise the car remove the wheel arch holding screws (bottom 5, 1/4 turn and they pop out. Peel the wheelarch cover open just enough to get your hand in. Pop the fog lamp blank off. Carfully slide in the fog lamp attached to the bezal between the wheelarch liner and the wing pop into place secure with the supplied screws connect the plug that is taped back with in my case blue insulating tape. Repeat other side.
Fiting the new stalk is easy , unscrew the three screws on the botton of the stearing wheel binical, remove the top half of the binical. Remove the bottom half, REMEMBER TO TAKE CARE WITH THE KEY ILUMINATION LED. Unscrew the two small screws holding in the stalk pull out towards the passenger door MIND THE DASH and unplug,fit the new supplied stalk refit the binical,and switch on!!
I alinged the lamp farly newtral in the bezal same gap all round beteen the lanp and the bezal and it is aligned just fine.
Silver bezal looks great on my Copper red rag top.