by Jake Dixon
Date Added: Thursday 25 October, 2018
So it's been well over a week since I installed this intake. First things first installing it will be a bit tricky if you run a standalone ECU without the MAF sensor as you'll have to buy some piping and another silicon join where the MAF used to sit.
The filter cover screws are very sensitive!! I have already stripped one of them and the whole copper screw came out of the plastic mould. So i had to drill straight through and use another longer M5 Bolt and nut underneath.
This intake system is the best out there. Forget pod filters, forget fancy chrome heavy piping that gets hot. This is the real deal. I took my dad for a drive, My brother, and my friends and they all say it has more power. I noticed when on the motorway doing 100KPH... I don't have to put much throttle down as much as I used to in 5th gear when accelerating to 110-120.
it's a shorter ram style intake which means you'll get more torque down low and it's sucking cold air straight from the grill.
What an amazing product. Worth every dollar.
You will not find another cold air induction kit out there that's better then this!!! (unless you got a turbo)
Here's a picture installed
MX5Parts & IL Motorsport Thank you so much.