by António Sousa
Date Added: Monday 10 June, 2019
Does a good job in cooling, but it was a bit of a pain to install.
1) The mounting holes DO NOT line up with the stock Mazda radiator, and the tabs do not move enough to compensate for this. I had to extend 3 of the holes for it to mount properly.
2) The connectors on the two fans are of different types.
Note: The fan shroud depth is extended in order to seal up to the stock (retracted) Mazda radiator. If using an aftermarket radiator, you may have to cut away some depth from the shroud.