by Barry Evans
Date Added: Friday 20 June, 2003
Easyish to fit, Prise out surround from front (wide) side using broaad chisel. Put masking tape around plastic surround (easier marking and less hassle if drill slips). mark off and drill 5mm holes. Make sure front (wide) end is parallel. Use a drop of "locktite" (from Halfords) or similar on each nut.
Looks the business, really pleased with result.
Note that you will have to cut a bit off the rear locating tab to allow last screws to fit. Saw down with junior hacksaw then "nibble" off with pliers.