Date Added: Friday 09 June, 2006
Not what I expected. I wanted a better ride but only a little lowering of the car was planned for. Ordering and all went well but after installation it turns out to be much lower then expected. After checking it against a standard 5 standing next to me it turned out to be not 13 mm lower but a full 35 mm!! The rear reference point is now even lower then the front (supposed to be 30 mm +- 10 mm higher) I can not imagine I did anything wrong in the installation. So I\'m curious what the techies have to say about it.
Editors Note: If the rear is lower than the front, you have fitted the springs the wrong way round! The shorter thicker (wire diameter) springs go on the front and the longer thinner springs go on the rear.
Rating: [3 of 5 Stars!]