by Richard Baldry
Date Added: Sunday 13 November, 2016
They don't have the support clips on the front line to attached to the factory mounting position necetating zip ties to hold it along the wishbone. The angled head for the banjo bolt was too sharp of an angle and had to be rotated into the wheel well to be able to fit on the near side.
The rear lines heatshrink stops the lines fitting into the rear caliper retaining 'hook' and you need to use zip ties to the body mounting as the head of the female connection is too large to allow use of the old retaining clip.
Looking again I would buy the IL Motorsport ones which appear to avoid all of these issues.