by Chris Ward
Date Added: Wednesday 25 June, 2008
Excellent service from MX5Parts as usual. Very easy part to fit - 3 Phillips self-tapping screws to remove from under the steering wheel cowl, a bit of judicious jiggling to separate the two halves of the cowl, and the top half lifts free. (I found it easier to lower the steering wheel to its lowest position to give me more room to manoeuvre.) Slide the bottom half down a bit, and undo the 2 screws holding the old unit in place and it slides out. Unplug the electrical connection from the bottom, then fit the new one, and it all goes back in reverse order. And it works fine - as you would expect!