Continuer
Fortsätt
Continuar
Continua
Made exclusively for us right here in the UK, here is the answer to many peoples prayers!
Take all the hassle out of getting the timing right when changing your cambelt with this incredibly simple cam locking tool! As the inlet cam is under tension from a valve spring, it has a tendancy to jump over to the next tooth when the belt is removed (or spin right round on the VVTI engine!)........well not anymore! Simply slide this tool between the two cam gears before you take the belt off and it will keep things nicely locked in place! It also helps if you want to remove the cam gears, locking them tight so the bolts can be cracked off. Also, if you are removing both the gears, cable tie them to the tool through the holes before removal and it will keep everything in line making refitting a doddle!
Suitable for all Mk1 Mk2 & 2.5 models, 1989>2005.
SAVE
