Amazing performance upgrade!
Here we have a fantastic quality, four piston, front caliper upgrade kit for the Mk1 & Mk2/2.5. The calipers are made from high quality aluminium, and have been specifically designed by IL Motorsport to fit without any special adaptions. Each caliper contains four 33mm pistons, giving incredible bite and performance in all conditions. The kit is supplied with a pair of calipers in either red or black, a pair of quality Fischer stainless steel front brake hoses (required for fitting), and set of quality Hawk Performance DTC-60 brake pads. The combination of increased bite from the calipers and pads coupled with the reduced "spongy feel" given by the stainless brake lines, will ensure truely unrivalled braking performance over the standard set up. Comes supplied with full TUV certification for use in all European countries that accept German TUV.
Fits all Mk1, Mk2 & 2.5 models, 1989>2005
Please Note: There are only two requirements to fit these calipers. The first is they require the larger 255mm brake discs as fitted to later 1.8 Mk1's, and all Mk2/2.5 models with standard brakes. If you have smaller discs, they will need to be replaced for larger ones. You can choose from either the Genuine Mazda or the EBC Turbogroove upgrade. If you already have the larger 270mm Mk2.5 Sport discs, these calipers can NOT be fitted. We strongly recommend you measure your front discs before ordering. The second requirement is that you MUST have 15" or larger diameter wheels. Once fitted, ensure that there is between 3-5mm clearance between the caliper and the wheel. Certain wheels may require spacers to give the correct clearance, which can be specially ordered for you, however the majority of wheels fit perfectly.
Click here for replacement pads for these kits!