Fortsätt
Continuar
Continua
Made right here in the UK by a specialist engineering company, these top quality solid brass replacement gear shift collars have been designed specifically to cure the problem with excessive play in the gear lever. This is a well-known issue cause by a poor design in the original plastic bush that wears prematurely. Replacement bushes for early NC models are no longer available from Mazda, and the updated version fitted to later cars is frankly no better. By fitting one of these collars however, you will dramatically reduce play and benefit from a more positive gear change which should last the lifetime of the car.
There is a choice of two depending on year and chassis number which are as follows –
SI8329 - Mk3 NC 2005>2008 up to chassis number 151769SI8330 – Mk3.5 & 3.75 2008>2015 from chassis number 151770 on.
Please select which one you need from the drop down box above.
Fits all Mk3, 3.5 & 3.75 models, 2005>2015 with 6 speed transmission only.
Please Note: If you have an early car but have previously had the later upgraded version fitted by Mazda, you will need to order the later collar as part of the modification was replacing the piece in the gearbox that this collar fits in to.