Hood Soft Tops & Fittings for Mazda MX5 MK1
Hoods, Soft Tops & Fittings for Mazda MX-5 Mk1 (1989–1998)
Keep your classic Mazda MX-5 Mk1 protected from the elements with replacement soft tops, hood components and essential fitting parts. Whether your original roof is showing signs of age, the rear window has deteriorated or you're undertaking a full restoration, choosing the right parts can help restore the appearance and weather protection of your NA roadster.
The Mk1's folding soft top is an important part of the car's character. With replacement hoods available in different materials and colours, you can maintain a traditional appearance or choose an alternative finish to suit your preferences.
Replacement Soft Tops for Your MX-5 Mk1
Over time, exposure to sunlight, rain and repeated folding can cause a soft top to fade, crack or split. A replacement hood can refresh the car's appearance and help keep the cabin dry when correctly fitted and maintained.
Replacement options may include vinyl hoods and versions with a glass rear window, depending on the products available. Consider the material, window design, colour and compatibility with your existing hood frame before choosing a replacement. Always check the individual product description for details of the material supplied and the models it fits.
More Than Just the Hood Fabric
A successful roof replacement may require attention to several associated components. The hood frame supports the roof as it opens and closes, while tensioner cables help maintain the fabric's position. Seals and other fittings contribute to the roof's alignment and weather protection.
The rain rail is particularly important. Positioned beneath the rear edge of the hood, it channels water towards the hood drainage system on either side of the car. An old, brittle or cracked rain rail can allow water to enter the cabin or boot area, so carefully inspect its condition whenever the hood is replaced.
It is also worth checking the hood drain covers and drainage channels. Keeping these clear and in good condition helps water drain away as intended and reduces the risk of water collecting around the cabin or rear storage area.
Choose the Right Parts for Your Mk1
The Mazda MX-5 Mk1, also known as the NA, was produced from 1989 to 1998. Before ordering, check that each hood or fitting is compatible with your model and existing roof arrangement. Some parts are shared across multiple MX-5 generations, while others are specific to the Mk1 or to a particular side of the car.
Check whether the hood is supplied with the rain rail, tensioner cables, seals or other hardware, as these items may need to be purchased separately. If you're replacing the fabric but retaining the original frame, inspect it for corrosion or damage before starting the job.
Fitting and Caring for Your Soft Top
Replacing a soft top requires patience and careful fitting. The fabric must be positioned and tensioned correctly, and the rain rail and seals must be installed properly to manage water. Owners with suitable tools and experience may choose to tackle the work themselves, while others may prefer to use a specialist trimmer.
Once fitted, regular cleaning and appropriate fabric care can help keep the hood looking its best. Avoid forcing the roof closed if the fabric feels unusually tight, and follow the manufacturer's guidance for cleaning, proofing and folding.
Browse our range of Mazda MX-5 Mk1 hoods, soft tops and fittings to find the components you need for maintenance, repair or restoration.
Also, check out our comprehensive hood fitting guide which should help point you in the right direction!
Frequently Asked Questions (FAQs)
Which replacement hood fits the Mazda MX-5 Mk1?
Choose a hood specifically listed for the Mazda MX-5 Mk1, also known as the NA, covering the 1989–1998 model range. Check the product description for the material, rear-window type and compatibility details before ordering.
Should I choose a vinyl or mohair hood?
The best choice depends on your budget, preferred appearance and maintenance requirements. Vinyl offers a traditional finish, while mohair style fabric provides a different texture and appearance. Compare the available products and follow the manufacturer's care recommendations for the material you choose. In general, if they are cared for properly fabric hoods tend to last longer.
Can I fit a glass rear window to my Mk1 MX-5?
Yes you can! The hood will fit perfectly, however if it didn't have a hood with a glass window fitted at the factory when it was built, you will most likely need to wire in a switch, fuse block and rear window wiring harness in order to connect the heated rear window.
Should I replace the rain rail when changing the hood?
We would strongly recommend replacing the rain rail during a hood replacement. Older rails can become brittle, distorted or cracked, potentially allowing water into the car. If the existing rail is damaged or deteriorating, replacing it at the same time can help avoid having to revisit the installation. We have both the Genuine Mazda rain rails available as well as a quality IL Motorsport version.
What does the rain rail do?
The rain rail sits beneath the rear edge of the soft top and directs water towards the hood drains. If it is cracked, incorrectly fitted, blocked or unable to channel water properly, leaks can develop around the rear of the cabin or boot area.
Why is are the carpets wet in my Mk1?
The most common cause of water ingress into the cabin area is blocked or damaged hood drains. These sit behind the seat belt towers on either side and channel the water down and out the bottom of the car. Over time these can become blocked with debris so we would recommend periodically cleaning them out with a hood drain cleaning brush. If you lift up the carpet on the parcel shelf behind the seat belt you will see the top of hood drain hopper. Gently feed the brush down the hole and once through, slowly pull it out the bottom of the car. Never pull it back out the top as it will break the one way flap inside and your only option will be to replace the hood drains which requires the whole hood to be removed from the car.
Why is my MX-5 leaking water around the soft top?
Possible causes include a damaged hood, worn seals, a cracked rain rail or blocked hood drains. Check the roof and drainage system rather than assuming the fabric itself is responsible. Water can also enter through other seals such as the windcreen header, so inspect the surrounding areas if the source is unclear. One common cause of hood leaks on a Mk1 is that the front hood catches don't lock in place properly, or they are not properly tensioned. If you can open the catch without pushing the button it is worn so you should consider replacing it. Catches can be tensioned using the adjuster on the clamp part which can been seen when the catch is fully open. Flip open the little plastic lock piece and turn the hex nut clockwise to shorten the length of the clamp. Try doing this one or two turns at a time and rechecking how the tension feels.
What other parts should I check when replacing my hood?
Inspect the hood frame for corrosion or damage, along with the tension cables, seals, rain rail and hood drain covers. The condition of these parts can affect the fit and function of the replacement roof. Check whether the new hood includes any associated hardware or whether it must be ordered separately.
Can I replace an MX-5 Mk1 soft top myself?
It is possible for an owner with suitable tools, patience and practical experience, but replacing a hood is a detailed job that can take much of a day. Correct positioning, tensioning and installation of the rain rail are important. If you're unsure, consider using a specialist.
How do I maintain my MX-5 soft top?
Clean the hood with products suitable for its material and follow the manufacturer's recommendations for proofing or other protective treatments. Keep the drainage channels clear and avoid folding the roof when the material is wet or frozen as doing so could damage the fabric or rear window.
Can I use Mk2 or Mk2.5 hood parts on my Mk1?
Some components are listed as compatible with the Mk1, Mk2 and Mk2.5, but this does not apply to every roof part. Check the individual product's compatibility information, especially for hoods, seals, frames and side-specific fittings. Mk2 hoods themselves can be used on a Mk1 but some adaptions need to be made the strapping where it goes round the hood frame.
How do I know if my hood frame needs replacing?
Look for significant corrosion, damaged joints, bent sections or problems with the frame's opening and closing mechanism. If the frame cannot support or tension the hood correctly, inspect it before installing replacement fabric. Confirm that any replacement frame is listed for your MX-5 Mk1.