Windscreen Cowl Leak Repair Kit, Mk3/3.5/3.75

Genuine Mazda Parts

Next to the hood drains, one of the biggest causes of water ingress into the Mk3 foot wells is through the small white plastic grommets under the windscreen cowl. The originals have a gasket that was meant to seal it but they disintegrate over time allowing a lot of water into the cabin, in some cases it even comes through into the interior fuse boxes. With this easy to fit kit you can stop this instantly.

Kit Contains -

2 x Replacement Grommets
2 x Replacement Black Plastic Caps (the old ones normally break when you remove them)

Fitting: Simply pop out the original black oval shaped cap at one end of the windscreen cowl and remove the screw underneath. Lift up the cowl itself to give you access and remove the old white grommet. Clean up the area around the hole and push in the new grommet (we recommend a small smear of silicone sealant is used to ensure a perfect seal), then replace the cowl and screw. Pop in the new black hole cover and repeat the process on the other side!

Fits all Mk3, 3.5 & 3.75 models, 2005>2015